Tuesday, June 17, 2014

What is IPV6


Internet Protocol version 6 (IPv6) is the latest version of the Internet Protocol (IP), the communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet.
 

Benefits of IPV6

Easier management of networks
IPv6 networks provide autoconfiguration capabilities. They are simpler, flatter and more manageable, especially for large installations.

End-to-end connective integrity
Direct addressing is possible due to vast address space - the need for network address translation devices is effectively eliminated.

Unconstrained address abundance
3.4 x 1038= 340 trillion trillion trillion addresses - about 670 quadrillion addresses per square millimetre of the Earth's surface.

Platform for innovation and collaboration
Given the numbers of addresses, scalability and flexibility of IPv6, its potential for triggering innovation and assisting collaboration is unbounded.

Integrated interoperability and mobility
IPv6 provides interoperability and mobility capabilities which are already widely embedded in network devices.

Improved security features
IPSEC is built into the IPv6 protocol, usable with a suitable key infrastructure.

The most obvious improvement in IPv6 over IPv4 is that IP addresses are lengthened from 32 bits to 128 bits. This extension anticipates considerable future growth of the Internet and provides relief for what was perceived as an impending shortage of network addresses. IPv6 also supports auto-configuration to help correct most of the shortcomings in version 4, and it has integrated security and mobility features.

Huawei can provide end-to-end IPv6 solutions for Internet access, 3G, NGN, IMS, FMC and more, while supporting IPv4-IPv6 transition technologies like dual-stack, tunnels, and protocol translation. Scoring high during the IPv6 tests, the Huawei data communications devices, broads and interfaces can help operators success in the IPv6 transformation and this technology has been applied to many Huawei routers and Huawei switches. The more information about the Huawei products you want to know, www.huanetwork.com will help you to have better understanding of them. 

More related topics:
How to Configure IPv6 Static Routes

Huawei S5700-24TP-PWR-SI Vs Huawei S5710-52C-EI


Huawei S5700 series gigabit enterprise switches are next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software, the S5700 provides a large switching capacity and high-density GE ports to accommodate 10 Gbit/s upstream transmissions. The S5700 can be used in various enterprise network scenarios. For example, it can function as an access or aggregation switch on a campus network, a gigabit access switch in an Internet data center (IDC), or a desktop switch to provide 1000 Mbit/s access for terminals.


Vs
USD967.00
Reference price
USD4,727.00
Twenty 10/100/1000Base-T  ports and four GE combo ports
Port
Forty-eight 10/100/1000 Base-T ports and four 10GE SFP+ ports
36  Mpps
Forwarding performance
192Mpps
One extended slot for a stack card
Extended slot
Provide two extended slots for uplink subcards
IEEE 802.1d compliance
16 K MAC address entries on the S5700SI
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
MAC address table
IEEE 802.1d compliance
32K MAC address entries
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
4 K VLANs
Guest VLAN and voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
VLAN
4 K VLANs
Guest VLAN and voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
SuperVLAN
Static routing, RIPv1, RIPv2, and ECMP
IP routing
Static routing, ECMP
RIPv1, RIPv2 and RIPng
OSPF, OSPF v3, IS-IS, IS-ISv6, BGP and BGP 4+
Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
6to4 tunnel, ISATAP tunnel, and manually configured tunnel
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
IPv6 features
Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
6to4 tunnel, ISATAP tunnel, and manually configured tunnel
Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffi
c policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
WRED (supported by the S5700HI)
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layer 2 to Layer 4, filtering
out invalid frames based on the source MAC address,
destination MAC address, source IP address, destination IP address, port number, protocol type,
and VLAN ID
Rate limiting in each queue and traffic
shaping on ports
QoS/ACL
Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
WRED
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
Security
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
Stacking (The S5700HI do not support this function)
MAC Forced Forwarding (MFF)
Virtual cable test
Port mirroring and RSPAN (remote port mirroring)
Remote configuration and maintenance by using Telnet
SNMP v1/v2/v3
RMON
Web NMS
HGMP
System logs and alarms of different levels
GVRP
MUX VLAN
802.3az EEE (supported by the S5700HI)
Management and maintenance
Stacking
MAC Forced Forwarding (MFF)
Virtual cable test
Port mirroring and RSPAN (remote port mirroring)
Remote configuration and maintenance by using Telnet
SNMP v1/v2/v3
RMON
Web NMS
HGMP
System logs and alarms of different levels
GVRP
MUX VLAN
NetStream
AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
Input voltage
AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
DC:
Rated voltage range: –48 V to –60 V, DC
Maximum voltage range: –36 V to –72 V DC
Note: PoE-support switches do not use DC power supplies.
442 mm x 420mm x 43.6 mm
Dimensions: width x depth x height
442 mm x 420 mm x 43.6 mm
< 455 W(POE power: 370 W)
Power consumption
<165W


As a world leading Huawei networking products distributor, Huanetwork.com wholesales original new Huawei networking equipments, including Huawei switches, Huawei routers, Huawei symantec security products, Huawei IAD, Huawei SFP and other Huawei networking products. Our customers include telecom operators, Huawei resellers, ISP and system integrators. If you have such requirement please contact your sales person, if you are new customer, please feel free to contact sales@huanetwork.com. Our HCIE headed technical team can provide network design, products installation and configuration, trouble shooting etc.



More related topics: